Optical Properties Prediction for Red and Near-Infrared Emitting Carbon Dots Using Machine Learning.

Functional nanostructures build up a basis for the future materials and devices, providing a wide variety of functionalities, a possibility of designing bio-compatible nanoprobes, etc. However, development of new nanostructured materials via trial-and-error approach is obviously limited by laborious efforts on their syntheses, and the cost of materials and manpower. This is one of the reasons for an increasing interest in design and development of novel materials with required properties assisted by machine learning approaches. Here, the dataset on synthetic parameters and optical properties of one important class of light-emitting nanomaterials - carbon dots are collected, processed, and analyzed with optical transitions in the red and near-infrared spectral ranges. A model for prediction of spectral characteristics of these carbon dots based on multiple linear regression is established and verified by comparison of the predicted and experimentally observed optical properties of carbon dots synthesized in three different laboratories. Based on the analysis, the open-source code is provided to be used by researchers for the prediction of optical properties of carbon dots and their synthetic procedures.

Green and Red Emissive N,O-Doped Chiral Carbon Dots Functionalized with l-Cysteine.

Although chirality plays an important role in the natural world, it has also attracted much scientific attention in nanotechnology, in particular, spintronics and bioapplications. Chiral carbon dots (CDs) are promising nanoparticles for sensing and bioimaging since they are biocompatible, ecofriendly, and free from toxic elements. Herein, green and red emissive chiral CDs are fabricated via surface modification treatment of achiral CDs at room temperature. After modification with l-cysteine molecules, the treated CDs demonstrate an intense chiral signal in the region of 200-300 nm with a dissymmetry factor up to 2.3 × 10-4 and high photoluminescence quantum yields of 19% and 15% for green and red emission bands, respectively. These CDs preserve their chiral signal in different ion systems, such as those with pH changes or in the presence of metal ions, along with remarkably low cytotoxicity, making them potential candidates for use as photoluminescent labels for biological objects.

PbSe/PbS Core/Shell Nanoplatelets with Enhanced Stability and Photoelectric Properties.

Lead chalcogenide nanoplatelets (NPLs) have emerged as a promising material for devices operating in the near IR and IR spectrum region. Here, we first apply the cation exchange method to PbSe/PbS core/shell NPL synthesis. The shell growth enhances NPL colloidal and environmental stability, and passivates surface trap states, preserving the main core physical properties. To prove the great potential for optoelectrical applications, we fabricate a photoconductor using PbSe/PbS NPLs. The device demonstrates enhanced conductivity and responsivity with fast rise and fall times, resulting in a 13 kHz bandwidth. The carrier transport was investigated with the field effect transistor method, showing p-type conductivity with charge mobility of 1.26 × 10-2 cm2·V-1·s-1.

Microfluidic Vaterite Synthesis: Approaching the Nanoscale Particles.

The challenge of continuous CaCO3 particle synthesis is addressed using microfluidic technology. A custom microfluidic chip was used to synthesize CaCO3 nanoparticles in vaterite form. Our focus revolved around exploring one-phase and two-phase synthesis methods tailored for the crystallization of these nanoparticles. The combination of scanning electron microscopy, X-ray diffraction, dynamic light scattering, and small-angle scattering allowed for an evaluation of the synthesis efficiency, including the particle size distribution, morphology, and polymorph composition. The results demonstrated the superior performance of the two-phase system when precipitation occurred inside emulsion microreactors, providing improved size control compared with the one-phase approach. We also discussed insights into particle size changes during the transition from one-phase to two-phase synthesis. The ability to obtain CaCO3 nanoparticles in the desired polymorph form (∼50 nm in size, 86-99% vaterite phase) with the possibility of scaling up the synthesis will open up opportunities for various industrial applications of the developed two-phase microfluidic method.

Energy-level engineering of carbon dots through a post-synthetic treatment with acids and amines.

Chemically synthesized carbon dots (CDs) have attracted a lot of attention as an eco-friendly and cost-efficient light-emitting material, and functionalization of CD surfaces with additives of different natures is a useful way to control their properties. In this study, we show how a post-synthetic treatment of CDs with citric acid, benzoic acid, urea and o-phenylenediamine changes their chemical composition and optical properties. In particular, it results in the formation of carboxyl/imide/carbonyl groups at the CD surface, leading to the appearance of additional blue (or for CDs treated with phenylenediamine, blue and green) emissive optical centers on top of the remaining emission from the original CDs. Most importantly, the increased oxidation degree alongside a decreased relative amount of carbon and nitrogen in such treated CDs decreases their highest occupied molecular orbital (HOMO) energy level by up to 0.9 eV (the maximal value was observed for CDs treated with o-phenylenediamine). Moreover, the Fermi energy level shifted above the lowest unoccupied molecular orbital (LUMO) energy level for some of the treated CD samples. Thus, the energy structure of CDs can be tuned and optimized for further applications through the functionalization of their surface with organic additives.

Near-Infrared Emission of HgTe Nanoplatelets Tuned by Pb-Doping.

Doping the semiconductor nanocrystals is one of the most effective ways to obtain unique materials suitable for high-performance next-generation optoelectronic devices. In this study, we demonstrate a novel nanomaterial for the near-infrared spectral region. To do this, we developed a partial cation exchange reaction on the HgTe nanoplatelets, substituting Hg cations with Pb cations. Under the optimized reaction conditions and Pb precursor ratio, a photoluminescence band shifts to ~1100 nm with a quantum yield of 22%. Based on steady-state and transient optical spectroscopies, we suggest a model of photoexcitation relaxation in the HgTe:Pb nanoplatelets. We also demonstrate that the thin films of doped nanoplatelets possess superior electric properties compared to their pristine counterparts. These findings show that Pb-doped HgTe nanoplatelets are new perspective material for application in both light-emitting and light-detection devices operating in the near-infrared spectral region.

Dual-Purpose Sensing Nanoprobe Based on Carbon Dots from o-Phenylenediamine: pH and Solvent Polarity Measurement.

Today, the development of nanomaterials with sensing properties attracts much scientific interest because of the demand for low-cost nontoxic colloidal nanoprobes with high sensitivity and selectivity for various biomedical and environment-related applications. Carbon dots (CDs) are promising candidates for these applications as they demonstrate unique optical properties with intense emissions, biocompatibility, and ease of fabrication. Herein, we developed synthesis protocols to obtain CDs based on o-phenylenediamine with a variety of optical responses depending on additional precursors and changes in the reaction media. The obtained CDs are N-doped (N,S-doped in case of thiourea addition) less than 10 nm spherical particles with emissions observed in the 300−600 nm spectral region depending on their chemical composition. These CDs may act simultaneously as absorptive/fluorescent sensing probes for solvent polarity with ∆S/∆ENT up to 85, for ∆ENT from 0.099 to 1.0 and for pH values in the range of 3.0−8.0, thus opening an opportunity to check the pH in non-pure water or a mixture of solvents. Moreover, CDs preserve their optical properties when embedded in cellulose strips that can be used as sensing probes for fast and easy pH checks. We believe that the resulting dual-purpose sensing nano probes based on CDs will have high demand in various sensing applications.

Revealing the nature of optical activity in carbon dots produced from different chiral precursor molecules.

Carbon dots (CDs) are light-emitting nanoparticles that show great promise for applications in biology and medicine due to the ease of fabrication, biocompatibility, and attractive optical properties. Optical chirality, on the other hand, is an intrinsic feature inherent in many objects in nature, and it can play an important role in the formation of artificial complexes based on CDs that are implemented for enantiomer recognition, site-specific bonding, etc. We employed a one-step hydrothermal synthesis to produce chiral CDs from the commonly used precursors citric acid and ethylenediamine together with a set of different chiral precursors, namely, L-isomers of cysteine, glutathione, phenylglycine, and tryptophan. The resulting CDs consisted of O,N-doped (and also S-doped, in some cases) carbonized cores with surfaces rich in amide and hydroxyl groups; they exhibited high photoluminescence quantum yields reaching 57%, chiral optical signals in the UV and visible spectral regions, and two-photon absorption. Chiral signals of CDs were rather complex and originated from a combination of the chiral precursors attached to the CD surface, hybridization of lower-energy levels of chiral chromophores formed within CDs, and intrinsic chirality of the CD cores. Using DFT analysis, we showed how incorporation of the chiral precursors at the optical centers induced a strong response in their circular dichroism spectra. The optical characteristics of these CDs, which can easily be dispersed in solvents of different polarities, remained stable during pH changes in the environment and after UV exposure for more than 400 min, which opens a wide range of bio-applications.

Beyond Charge Transfer: The Impact of Auger Recombination and FRET on PL Quenching in an rGO-QDs System.

PL intensity quenching and the PL lifetime reduction of fluorophores located close to graphene derivatives are generally explained by charge and energy transfer processes. Analyzing the PL from PbS QDs in rGO/QD systems, we observed a substantial reduction in average PL lifetimes with an increase in rGO content that cannot be interpreted solely by these two processes. To explain the PL lifetime dependence on the rGO/QD component ratio, we propose a model based on the Auger recombination of excitations involving excess holes left in the QDs after the charge transfer process. To validate the model, we conducted additional experiments involving the external engineering of free charge carriers, which confirmed the role of excess holes as the main QD PL quenching source. A mathematical simulation of the model demonstrated that the energy transfer between neighboring QDs must also be considered to explain the experimental data carefully. Together, Auger recombination and energy transfer simulation offers us an excellent fit for the average PL lifetime dependence on the component ratio of the rGO/QD system.

Strongly Luminescent Composites Based on Carbon Dots Embedded in a Nanoporous Silicate Glass.

Luminescent composites based on entirely non-toxic, environmentally friendly compounds are in high demand for a variety of applications in photonics and optoelectronics. Carbon dots are a recently developed kind of luminescent nanomaterial that is eco-friendly, biocompatible, easy-to-obtain, and inexpensive, with a stable and widely tunable emission. Herein, we introduce luminescent composites based on carbon dots of different chemical compositions and with different functional groups at the surface which were embedded in a nanoporous silicate glass. The structure and optical properties of these composites were comprehensively examined using electron microscopy, Fourier transform infrared transmission, UV-Vis absorption, and steady-state and time-resolved photoluminescence. It is shown that the silicate matrix efficiently preserved, and even enhanced the emission of different kinds of carbon dots tested. The photoluminescence quantum yield of the fabricated nanocomposite materials reached 35-40%, which is comparable to or even exceeds the values for carbon dots in solution.

Ligand-Assisted Formation of Graphene/Quantum Dot Monolayers with Improved Morphological and Electrical Properties.

Hybrid nanomaterials based on graphene and PbS quantum dots (QDs) have demonstrated promising applications in optoelectronics. However, the formation of high-quality large-area hybrid films remains technologically challenging. Here, we demonstrate that ligand-assisted self-organization of covalently bonded PbS QDs and reduced graphene oxide (rGO) can be utilized for the formation of highly uniform monolayers. After the post-deposition ligand exchange, these films demonstrated high conductivity and photoresponse. The obtained films demonstrate a remarkable improvement in morphology and charge transport compared to those obtained by the spin-coating method. It is expected that these materials might find a range of applications in photovoltaics and optoelectronics.

Tunable Mie Resonances of Tin-based Iodide Perovskite Islandlike Films with Enhanced Infrared Photoluminescence.

The ability of light manipulation at a sub-wavelength scale of metal halide perovskite-based nanostructures through nanophotonic design were employed for advanced optical and optoelectronic applications. While these nanostructures could be efficiently tuned in the visible spectral range, their operation at infrared wavelengths is still challenging. Herein, we illustrate that islandlike films of lead-free CH3NH3SnI3 can generate strong and tunable Mie-type resonances in the near-infrared spectral range. Two critical factors contribute to the Mie resonance properties-the microscale geometry is crucial for the initiation of Mie resonances in the particles, while the concentration of free holes formed via the oxidation of Sn2+ to Sn4+ modulates the spectral position of Mie resonances. Moreover, coupling the Mie resonances to the photoluminescence peak wavelength results in the enhancement of the photoluminescence intensity. This study offers a platform for the implementation of optically resonant perovskite nanostructures as tunable light emitters for infrared photonics and optoelectronics.

Nonparabolicity of size-quantized subbands of bilayer semiconductor quantum wells with heterojunction.

This paper presents a theory of size quantization and intersubband optical transitions in bilayer semiconductor quantum wells with asymmetric profile. We show that, in contrast to single-layer quantum wells, the size-quantized subbands of bilayer quantum wells are nonparabolic and characterized by effective masses that depend on the electron wave number and the subband number. It is found that the effective masses are related to the localization of the electron wave function in the layers of the quantum well and can be controlled by varying the chemical composition or geometric parameters of the structure. We also derive an analytical expression for the probability of optical transitions between the subbands of the bilayer quantum well. Our results are useful for the development of laser systems and photodetectors based on colloidal nanoplates and epitaxial layers of semiconductor materials with heterojunctions.

Influence of the solvent environment on luminescent centers within carbon dots.

Carbon dots (CDs) are luminescent nanomaterials, with potential use in bioimaging and sensorics. Here, the influence of the surrounding solvent media on the optical properties of CDs synthesized from the most commonly employed precursors, namely citric acid and ethylenediamine, is investigated. The position of optical transitions of CDs can be tuned by the change of pH and solvent polarity. The most striking observation is related to the interaction of CDs with chlorine containing solvents, which results in resolving a set of narrow peaks within both the absorption and PL bands, similar to those observed for polycyclic aromatic hydrocarbons or organic dyes. We assume that the chlorine containing molecules penetrate the surface layers of CDs, which results in an increase of the distance between the luminescent centers; this correlates well with an enhanced D-band in their Raman spectra. A model of CDs composed of a matrix of hydrogenated amorphous carbon with the inclusions of sp2-domains formed by polycyclic aromatic hydrocarbons and their derivatives is suggested; the latter are stacked ensembles of the luminophores and are considered as the origin of the emission of CDs.

Lead-Free Perovskites for Lighting and Lasing Applications: A Minireview.

Research on materials with perovskite crystal symmetry for photonics applications represent a rapidly growing area of the photonics development due to their unique optical and electrical properties. Among them are high charge carrier mobility, high photoluminescence quantum yield, and high extinction coefficients, which can be tuned through all visible range by a controllable change in chemical composition. To date, most of such materials contain lead atoms, which is one of the obstacles for their large-scale implementation. This disadvantage can be overcome via the substitution of lead with less toxic chemical elements, such as Sn, Bi, Yb, etc., and their mixtures. Herein, we summarized the scientific works from 2016 related to the lead-free perovskite materials with stress on the lasing and lighting applications. The synthetic approaches, chemical composition, and morphology of materials, together with the optimal device configurations depending on the material parameters are summarized with a focus on future challenges.

Optical Properties, Morphology, and Stability of Iodide-Passivated Lead Sulfide Quantum Dots.

Iodide atomic surface passivation of lead chalcogenides has spawned a race in efficiency of quantum dot (QD)-based optoelectronic devices. Further development of QD applications requires a deeper understanding of the passivation mechanisms. In the first part of the current study, we compare optics and electrophysical properties of lead sulfide (PbS) QDs with iodine ligands, obtained from different iodine sources. Methylammonium iodide (MAI), lead iodide (PbI2), and tetrabutylammonium iodide (TBAI) were used as iodine precursors. Using ultraviolet photoelectron spectroscopy, we show that different iodide sources change the QD HOMO/LUMO levels, allowing their fine tuning. AFM measurements suggest that colloidally-passivated QDs result in formation of more uniform thin films in one-step deposition. The second part of this paper is devoted to the PbS QDs with colloidally-exchanged shells (i.e., made from MAI and PbI2). We especially focus on QD optical properties and their stability during storage in ambient conditions. Colloidal lead iodide treatment is found to reduce the QD film resistivity and improve photoluminescence quantum yield (PLQY). At the same time stability of such QDs is reduced. MAI-treated QDs are found to be more stable in the ambient conditions but tend to agglomerate, which leads to undesirable changes in their optics.

Luminescence enhancement of alloyed quantum dots bound to gold nanoparticles by mercaptocarboxylic acids in colloidal complexes.

The understanding of the physical mechanisms of the nanoobjects interaction within the nanostructured complex materials is one of the main tasks for the development of novel materials with tunable properties. In this work, we develop a formation procedure of the colloidal complexes based on alloyed CdZnSe/ZnS quantum dots and gold nanoparticles where the various mercaptocarboxylic acids are used as the binding molecules. The QD photoluminescence enhancement (up to ×3.1) can be achieved by the control of the interparticle distance in colloidal solutions. We provide a detailed discussion on the influence of the linking molecules on the nanoparticle complexes optical parameters through the steady-state and time-resolved spectral measurements.

Enhanced stability of the optical responses from all-inorganic perovskite nanocrystals embedded in a synthetic opal matrix.

Nanostructured luminescent materials based on perovskite nanocrystals (p-NCs) are attractive since their optical properties can be tuned in a wide spectral range with high luminescence quantum yields and lifetimes, however, they lack stability. In this work, the optical properties of highly luminescent colloidal p-NCs (CsPbX3, where X = Cl/Br, Br, I) embedded in porous opal matrices are presented. It is shown that the photoluminescence of the p-NCs embedded into opal matrices possess increased longtime stability of its spectral and kinetic parameters under ambient conditions. LEDs based on the developed materials show pure color p-NC emission with stability of its parameters. The results of this work may expand the knowledge of interactions between luminescent nanoparticles within multicomponent nanostructured materials for further photonic applications.

Porous flower-like superstructures based on self-assembled colloidal quantum dots for sensing.

Quantum dots (QDs) have been envisaged as very promising materials for the development of advanced optical sensors. Here we report a new highly porous luminescent material based on colloidal QDs for potential applications in optical sensing devices. Bulk flower-like porous structures with sizes of hundreds of microns have been produced by slow destabilization of QD solution in the presence of a non-solvent vapor. The porous highly luminescent material was formed from CdSe QDs using the approach of non-solvent destabilization. This material demonstrated a 4-fold decrease in PL signal in the presence of the ammonia vapor. The relationship between the destabilization rate of QDs in solution and the resulting morphology of structural elements has been established. The proposed model of bulk porous flower-like nanostructured material fabrication can be applied to nanoparticles of different nature combining their unique properties. This research opens up a new approach to design novel multi-component composite materials enabling potential performance improvements of various photonic devices.

Time-resolved FRET in AgInS2/ZnS-CdSe/ZnS quantum dot systems.

The fast and accurate detection of disease-related biomarkers and potentially harmful analytes in different matrices is one of the main challenges in the life sciences. In order to achieve high signal-to-background ratios with frequently used photoluminescence techniques, luminescent reporters are required that are either excitable in the first diagnostic window or reveal luminescence lifetimes exceeding that of autofluorescent matrix components. Here, we demonstrate a reporter concept relying on broad band emissive ternary quantum dots (QDs) with luminescence lifetimes of a few hundred nanoseconds utilized for prolongating the lifetimes of organic or inorganic emitters with lifetimes in the order of a very few 10 ns or less through fluorescence resonant energy transfer. Using spectrally resolved and time-resolved measurements of the system optical response we demonstrate the potential of lifetime multiplexing with such systems exemplarily for AgInS2/ZnS and CdSe/ZnS QDs.